Stenner Pumps S Serie Manual De Instalación Y Mantenimiento página 61

OPERATING DISPLAY
PPM FEED, VARIABLE FLOW
NAVIGATION IN HALL EFFECT MODE
PRIME
Runs pump at 100% speed
while button is pressed
• If a password is set, the pump controls will lock out after 60 seconds if there is no keypad activity.
• To unlock the pump, press ENTER for 2 seconds. The pump will display a prompt to enter a password.
Run Pump?
Yes
yes/no select
PPM
OFF
If unlocked or password not set.
Bar graph along
bottom shows rate of
incoming pulses from
0 to 100%
S Series FW 4.01.02 US and Canada 800.683.2378, International 904.641.1666 www.stenner.com
continued
ON/OFF
Turns pump control ON or OFF
WARNING: DOES NOT remove power.
PPM
50
%
PPM
100
Pump runs at 100% speed while
the PRIME button is pressed (if
unlocked or password not set).
BACK
Cycles the display through
the units of output,current
process flow, and total
process flow (gallons or
liters, GPM or LPM).
%
Hold for 2 seconds
%
Prime
Metric is displayed if
selected in Configuration
61
ENTER
Press and hold for 2 seconds
to go to the Main Menu
Enter password if display is locked.
To Main Menu if unlocked.
PPM Process Gal
999,999.9
PPM Process GPM
2.5
PPM RPM
22
PPM GPD
20.0
PPM GPH
0.83
PPM oz/min
1.77