Stenner Pumps S Serie Manual De Instalación Y Mantenimiento página 68

CONNECTIONS
HALL EFFECT OR PPM VARIABLE FEED
Sensor
Hall Effect Output
Connection Terminals
• Connect meter positive input to Hall+12VDC, position #10 on the top row.
• Connect meter common to Signal Common, position #9 on the top row.
• Connect meter signal to Pulse/PPM/Hall signal, position #8 on the top row.
1 2 3 4
Output Output
Standby
Relay Relay
+
( )
1 1
Output Output 4-20mA
Relay Relay OUT
−
3 3 ( )
11 12 13 14
The 12VDC supply from connection #10 is limited to 20mA and is only for powering Hall Effect
sensors on turbine or paddlewheel type flow meters. Do not use the 12VDC output for anything else; otherwise,
damage to the pump will occur.
S Series FW 4.01.02 US and Canada 800.683.2378, International 904.641.1666 www.stenner.com
continued
8
5 6 7
4-20mA Pulse/
Standby 0-10VDC
IN PPM/Hall
− +
( ) ( signal) Common
+
( signal) signal
Leak Leak Flow
4-20mA
OUT Detect
Detect Detect
+
)
( External External
15 16 17 18
Pump
SIG
Input
(–)
(+)
9 10
Signal Hall
+
12VDC
Flow Flow
Detect Detect
− +
( ) 12VDC
19 20
68