Stenner Pumps S Serie Manual De Instalación Y Mantenimiento página 64

OPERATING DISPLAY
ENTER PASSWORD
NAVIGATION IN OPERATING MODE
PRIME
Runs pump at 100% speed
while button is pressed
• If a password is set, the pump controls will lock out after 60 seconds if there is no keypad activity.
• To unlock the pump, press ENTER for 2 seconds. The pump will display a prompt to enter a password.
This example shows the MANUAL operating display. The password steps are the same from any operating display.
From any operating display
S Series FW 4.01.02 US and Canada 800.683.2378, International 904.641.1666 www.stenner.com
continued
ON/OFF
Turns pump control ON or OFF
WARNING: DOES NOT remove power.
Manual %
50
Hold for
2 seconds
BACK
Cycles the display through
the units of output
Enter Password
0-9, A-Z
If password
is incorrect
INCORRECT
PASSWORD
Displays for 3 seconds and then returns
to previous operating display
64
ENTER
Press and hold for 2 seconds
to go to the Main Menu
Go to Main Menu or
to Alarm Reset if
in alarm condition.
If password
set
is correct