Descargar Imprimir esta página

marposs MIDA TOOL EYE Manual De Instalacion Y Uso página 60

Brazo de medición eléctrico

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

ENGLISH
N.B.
The measurement probes installed in the Arm, and the Arm itself, have been designed to be
[
used as measurement tools. Under certain unusual conditions, the arm may generate a
spurious probe closed signal. For this reason, the arm should not be used as a limit switch on
the machine, which should be fitted with devices that have be specifically designed to perform
this function.
2.2.1.3 Arm Safety
The Arm has been designed and built to be installed on an automatic machine that guarantees it remains
under control and that it functions correctly.
Therefore, the Arm actuators are controlled by the final machine command systems, which must conform to
the regulations covering machine safety.
2.2.2 Risks, protection devices, warnings, caution
2.2.2.1 Safety devices
The gauge is not fitted with overtravel indicator safety devices.
2.2.2.2 Residual risks
Lifting (transport) and mounting
CRUSHING HAZARD
Do not insert arms or hands between the gauge fixing elements during the mounting procedure.
Moreover, it is important to remember that:
Incorrect behaviour on the part of the operator can cause residual risks.
Due to the way the device is constructed, it is not possible to provide complete protection against the risks
and hazards generated by:
Operator distraction,
Failure to adhere to the information and rules contained in these operating instructions,
Deliberately tampering with the gauge and/or its safety devices,
Tampering with the fixed and movable safety panels,
due to the type of construction it is not possible to guarantee absolute safety.
2.2.2.3 Pictograms
After having identified a series of residual risks inherent in the gauge, it has been fitted with a series of
hazard warning pictograms defined in accordance with the European standard on graphic symbols to be
used on machines.
The Customer shall be responsible for replacing any safety and/or warning labels whenever they become
illegible for any reason.
CRUSHING HAZARD
Do not insert arms or hands between the gauge fixing elements during the mounting procedure.
MIDA TOOL EYE-ELECTRIC
60

Publicidad

loading

Productos relacionados para marposs MIDA TOOL EYE

Este manual también es adecuado para:

D31020m722