marposs MIDA TOOL EYE Manual De Instalacion Y Uso página 61

3.
GENERAL DESCRIPTION AND TECHNICAL DATA
3.1 General description of the equipment
The equipment consists of an arm fitted with a mida TT30 tool check probe. The probe is connected to the
machine PLC/CNC via the E32A-SSR LITE interface which converts its signal into a form that can be used
by the machine tool CNC.
E32A-SSR
INTERFACE
CABLE
(3m/5m/10m)
MIDA TOOL EYE ELECTRIC
Figure 3-1.
TO PLC/CNC
NOT
SUPPLIED
ARM
system.
Section 3. GENERAL DESCRIPTION AND TECHNICAL DATA
HOUSING
LED STATUS
GREEN: Arm in measuring position
RED: Probe deflected
STYLUS
TT30
61