marposs MIDA TOOL EYE Manual De Instalacion Y Uso página 62

ENGLISH
3.2 Technical features
ARM
Typical arm positioning repeatability
• for 6" to 15" chucks
• for 18" to 24" chucks
Degree of protection
Operating temperature
Storage temperature
Arm weight
MIDA TT30 PROBE (code 3427877000)
( )
Measuring axes
Unidirectional repeatability
Measuring force in XZ plane
Measuring force in Y plane
Overtravel in XZ plane
Y axis overtravel
Degree of protection
( )
Machine axes references
Reference stylus: L=25mm
E32A-SSR LITE INTERFACE (code 8303322833)
Logic circuit power supply
Output power supply
(if powered separately)
Type of interface
SSR output features
Degree of protection
Operating temperature
Storage temperature
All outputs are protected against short circuits, overloads and connection of inductive loads. If short circuits
occur, the current is electronically limited: the output is automatically reset when the short circuit is
removed.
Power supplies are protected internally by circuits which prevent the damage caused by overcurrents and
polarity inversion.
WARNING
The interface pins and terminals not described in this application are used in other interface
applications. Please do not use the terminals not described. Use those described in the ways
indicated in this manual.
MIDA TOOL EYE-ELECTRIC
62
: 2σ≤5μm X/Z (machine axes)
: 2σ≤8μm X/Z (machine axes)
: IP67
: from 5°C to 60°C
: from -10°C to 70°C
: between 1.3 kg and 2 kg, depending on the model
: ±X, ±Z, +Y
: 2σ ≤ 1μm
: 0,75 - 1,60 N
: 8,60 N
: ±11.6°
: 3.5 mm
: IP 67 (IEC)
: Vdc =24V DC (18÷30VDC) (max. ripple 5%);
0.5A (max.)
: Vdc = 24V DC (-15% / +20%) (max. ripple 5%);
0.5A (max.) max. current on outputs 100mA
: SINK/SOURCE (programmable)
: solid state relay ± 50 V peak, ± 40 mA peak
: IP 20 (IEC)
: from 5°C to 50°C
: from 0°C to 60°C