Honda BF40D Manual De Instrucciones página 240

6) Remove the reverse bevel gear/bearing assembly from the
propeller shaft holder using the special tools and hydraulic
press as shown.
1
TOOLS:
2
Driver handle, 15 x 325 mm
Base, 73 x 78/82.6
Bearing remover, 22 mm
3
4
5
6
7
8
9
10
11
12
7) Check the bearing for abnormal sound or play before
13
removing it. Replace the bearing if necessary.
14
8) Install a commercially available universal bearing puller
between the reverse bevel gear and bearing.
15
9) Remove the 6007 radial ball bearing from the reverse bevel
16 gear using the special tools and hydraulic press as shown.
Replace the bearing with a new one.
17
TOOLS:
Driver
18
Attachment, 32 x 35 mm
Pilot, 22 mm
19
20
11-10
[1]
DRIVER HANDLE,
15 x 325 mm
07946-MJ00100
07946-MJ00100
07965-SD90100
07GMD-KT70200
[5]
BEARING REMOVER,
22 mm
07GMD-KT70200
[4]
REVERSE BEVEL
GEAR/BEARING
ASSEMBLY
[3]
BASE, 73 x 78/82.6
07965-SD90100
[1]
DRIVER
07749-0010000
07749-0010000
07746-0010100
07746-0041000
[4]
PILOT, 22 mm
07746-0041000
240
[2]
PROPELLER
SHAFT
HOLDER
[2]
ATTACHMENT,
32 x 35 mm
07746-0010100
[3]
UNIVERSAL BEARING
PULLER
(Commercially available)