Honda BF40D Manual De Instrucciones página 396

11) Apply marine grease to the entire surface of the 34 mm
thrust washer, and install it on the mount frame.
12) Apply marine grease to the rotating part of the mount
frame shaft, and install the mount frame on the swivel case.
13) Install the 40 mm wave washer on the mount frame.
14) Warm up the lower mount center housing using a dryer or
equivalent tool.
Wear the gloves to warm up the lower mount center
housing.
15) Install the lower mount center housing on the mount frame
aligning the " " mark on the lower mount center housing
with the mark on the mount frame that has been made
during disassembly.
13-25
[2]
34 mm THRUST
WASHER
[1]
SWIVEL CASE
[5]
40 mm WAVE WASHER
[2]
" " MARK
396
[3]
MOUNT FRAME
[4]
(MARINE GREASE)
[1]
LOWER MOUNT
CENTER HOUSING
[3]
MARK