Power Tilt Relay/Power Tilt Switch [Power Trim/Tilt Type Only] - Honda BF40D Manual De Instrucciones

b. INSPECTION
• POWER TILT RELAY
NOTICE
Use a known-good battery and connect it to the power tilt relay
terminals with care not to short-circuit the relay.
1) Connect the battery cables to the power tilt relay terminals
as shown, and check for continuity between the terminals.
• Battery positive (+) cable connected to Light green
terminal:
Between Green and Black terminals
Between Blue and Black terminals
Between Green and White/Yellow terminals
Between Blue and White/Yellow terminals
• Battery positive (+) cable connected to Light blue
terminal:
Between Green and Black terminals
Between Blue and Black terminals
Between Green and White/Yellow terminals
Between Blue and White/Yellow terminals
2) Disconnect the battery cables from the power tilt relay
terminals, and check for continuity between the terminals.
Between Green and Black terminals
Between Blue and Black terminals
Between Green and White/Yellow terminals
Between Blue and White/Yellow terminals
3) If there is any abnormality, replace the power tilt relay.
• POWER TILT SWITCH
1) Check for continuity between the terminals with the switch
in each position.
Lg
[2] UP (Up)
[3] Neutral
[4] DN (Down)
: [5] Continuity
2) If there is any abnormality, replace the power tilt switch.
18-22
No continuity
Continuity
Continuity
[5]
No continuity
POWER TILT RELAY
Continuity
No continuity
No continuity
Continuity
Continuity
Continuity
No continuity
No continuity
W/Bl Lb
702
[2]
(+) to Light
green terminal,
or (+) to Light
blue terminal
[4]
(-) to Black
terminal
[3]
12V BATTERY
Lg
G Bu
[1]
POWER TILT SWITCH
Lb
W/Y
[1]
POWER TILT
RELAY
Bl
W/Y
Lb
Lg