Beta 1899SI Manual De Uso E Instrucciones página 23

OPERATION MANUAL AND INSTRUCTIONS ISTRUZIONI PER L'USO
CLEANING AN LPG TANK
Do not rest the machine on the vehicle because the fluid could accidentally leak out.
An LPG tank must be cleaned using the amount of fluid recommended by the supplier. Fill the AIR tank with a cleaning fluid for
LPG tanks. The machine reaches a maximum pressure of 10 Bar which is sufficient to open the tank's safety valve. If the pressure
is not sufficient to open the valve, we recommend carrying out the treatment when there is less LPG in the tank.
WARNING: the machine may not work if there is not enough fluid in the tank. Only use specific additives for cleaning
the tanks of LPG engines because the Manufacturer is not liable for damage to vehicles and the machine caused by the
use of NON-SPECIFIC products.
1. Position the machine close to the vehicle.
2. Tighten the correct adapter to the LPG tank charging socket and ensure that it is fully tightened to prevent leakages of the
cleaning fluid
3. Connect the relative pipe with the quick-release coupling to the male quick-release socket of the tank adapter
4. Connect the machine to the vehicle's battery (12 V dc): the black clamp to the negative pole (-) and the red clamp to the positive
pole (+).
5. Connect the LPG pipe Air Intake socket (7)
6. Select LPG and press OK
7. Select GPL TANK on the LPG menu
8. Fill the AIR tank and press OK
9. The fluid will be injected into the tank
EN I
23