Beta 1899SI Manual De Uso E Instrucciones página 26

OPERATION MANUAL AND INSTRUCTIONS ISTRUZIONI PER L'USO
15. During the treatment, at intervals accelerate to 2500 rpm max to avoid hydrolocking. This can lead to engine shut-down,
anomalous shaking or knocking of the engine.
16. In the case of anomalies in the engine's functioning, place the treatment in STAND-BY and decide whether to reduce the
sprinkling time or increase the stand-by time until these anomalies stop.
17. Wait for at least 5 minutes before re-starting the treatment
18. If the engine starts running again normally, re-start the treatment by pressing OK
19. When the fluid in the tank reaches the minimum quantity, the machine automatically stops the treatment
20. Switch off the vehicle and reconnect the ducts and connections of the engine.
21. Switch on the engine and keep it idling for 5 minutes before carrying out a road test at low speed.
22. Select the PURGE procedure on the LPG menu if you want to empty the tank without repeating the injector or tank cleaning
operations
23. Place the sprinkler pipe in an empty container
24. Press OK, in this way the fluid is pumped for 1 minute, ignoring the level so as to be able to completely empty the tank and
pipes.
SERVICE MENU
The CONTRAST and LANGUAGE can be adjusted on this menu. The TEST MODE procedure is reserved exclusively
for authorised technical personnel.
USING THE SERVICE MENU
1. Connect the machine to the vehicle's battery (12 V dc): the black clamp to the negative pole (-) and the red clamp to the positive
pole (+).
2. Select the SERVICE function on the second page of the main menu.
26
EN I