Beta 1899SI Manual De Uso E Instrucciones página 24

EN I
OPERATION MANUAL AND INSTRUCTIONS ISTRUZIONI PER L'USO
10. Press OK at the end of the treatment
11. At the end of the cleaning operations press YES if you want to empty the machine's pipes (recommended) or press NO to
end the operation
12. Place the sprinkler pipe in an empty container
13. Press OK; in this way the fluid is pumped until the pipes are completely empty.
14. The treatment will end if you press NO.
15. Disconnect the pipe from the vehicle and the adapter from the tank.
CONNECTION TO THE LPG INJECTION SYSTEM
Do not rest the machine on the vehicle because the fluid could accidentally leak out.
The LPG injectors must be cleaned in the times and using the amount of fluid recommended by the supplier. Fill the AIR tank
with the relative cleaning fluid, making sure that it is compatible with the type of injectors supplying the vehicle. The duration of
the cycle depends on the sprinkling and stand-by times set. For large capacity engines or in the case of excessive dirt, it may be
necessary to increase the amount of product required, so as to lengthen the treatment time to achieve the desired result.
WARNING: the machine may not work if there is not enough fluid in the tank. Only use specific additives for cleaning the
injectors or the injection system of LPG engines because the Manufacturer is not liable for damage to vehicles and the
machine caused by the use of NON-SPECIFIC products.
1. Position the machine close to the vehicle.
2. Disconnect the pipe positioned at the outlet of the vehicle's LPG filter.
3. Connect the sprinkler adapter pipe to the outlet of the LPG filter and ensure that it is completely tightened to prevent leakages
of the cleaning fluid and LPG
LPG INJECTORS
FROM LPG FILTER
24