Creo Medical CROMA Instrucciones De Uso página 29

Additional Settings
Change Speaker Volume and Screen Brightness
Caution
Ensure the tones are audible over the typical background noises.
o enable the adjustment of the Speaker Volume and Display Screen Brightness, press and hold the
T
Front Panel Menu button
then release the Menu
Additi onal Settings
Speak er Volume:
Displ ay Brightness:
Software Version:
1-AHU-XXX.YYY-ZZZ
ID 1: XXXXXXXX
The Additional Settings screen is displayed. While this screen is displayed, the speed of the cooling fans
in the Electrosurgical Generator is increased, providing some additional background noise to assist in
judging the preferred speaker volume.
To adjust either the Speaker Volume or Screen Brightness, briefly press the Menu button
the setting to be adjusted. Pressing the Menu button
setting is highlighted, use the + and – Control Buttons (4) to adjust the setting.
When the adjustments are made, confirm each setting by briefly pressing the Menu button
Once the desired settings are selected, press the Menu button
sounds an audible acknowledgment. On release of the Menu button
Display will revert to the Treatment Screen.
Please note - Other information is also displayed on this screen and is intended for product servicing use
only; this information and values displayed are not adjustable by the user.
Proprietary & Confidential - Page 29 of 391 - Uncontrolled if Printed
(5) until the Electrosurgical Generator sounds an audible acknowledgment,
button.
1
1
ID 2: XXXXXXXX
toggles between these two choices. Once the
until the Electrosurgical Generator
the Electrosurgical Generator
to highlight
.
26