Creo Medical CROMA Instrucciones De Uso página 43

Specifications
Essential Performance
For Microwave output freedom from the display of incorrect numerical values associated with the
therapy to be performed
For RF output there is no essential performance
NOTE: Under certain electromagnetic disturbance conditions, the Generator operation may be halted to
avoid system degradation. This requires the operator to re-start the system. A system re-start could take
up to 1 minute to complete.
Electrical Interference Safety Warnings
Warnings
Use of this equipment adjacent to or stacked with other equipment should be avoided
because it could result in improper operation. If such use is necessary, this equipment and the
other equipment should be observed to verify that they are operating normally.
Portable RF communications equipment (including peripherals such as antenna cables
and external antennas) should be used no closer than 30 cm (12 inches) to any part of the
Electrosurgical System (model ref 7-EMR-050) including cables specified by the manufacturer.
Otherwise, degradation of the performance of this equipment could result.
The EMISSIONS characteristics of this equipment make it suitable for use in industrial areas
and hospitals (CISPR 11 class A). If it is used in a residential environment (for which CISPR 11
class B is normally required) this equipment might not offer adequate protection to radio-
frequency communication services. The user might need to take mitigation measures, such as
relocating or re-orienting the equipment.
Proprietary & Confidential - Page 43 of 391 - Uncontrolled if Printed
40