Creo Medical CROMA Instrucciones De Uso página 30

Change Language
To change language, start with the Electrosurgical Generator in standby mode. Then restart the
Electrosurgical Generator by pressing ON/STANDBY button. Following re-start, press either the Menu
button , the UP (+) or the DOWN (–) key on the Front Panel before the screen illustrated below is
displayed. The start-up sequence will halt, and the Display will list the available languages.
Use the + and – Control Buttons located on the left of the Front Panel to highlight the applicable
language. When the required language is highlighted, confirm by pressing the Menu button .
The Electrosurgical Generator will then restart in the selected language.
Creo Medi cal Ltd
Electrosurgical
Generator
Software Version:
1-AHU-XXX.YYY-ZZZ
EN DE FR IT ES NE
Please note that the software version displayed on the Generator Front Panel may be different from the
illustration above.
27
Proprietary & Confidential - Page 30 of 391 - Uncontrolled if Printed