Blancone Clean&White XPower Manual De Instrucciones página 4

EN
1.4 Device configuration
Please refer to the packing list for device configurations.
1.5 Structure and components
The machine consists of main unit, handpiece (ultrasonic handpiece, air polishing hand-
piece), cable, bottle, dental air polishing powder, torque wrench and foot pedal, Power cord.
1.6 Replacement instruction for main accessories.
Name Model
Air polishing PA / PAP
handpiece
Ultrosonic handpiece S
Power cord /
Water pipe /
Torque wrench /
Foot pedal RFS05/RFS02
Water bottle /
Powder tank /
1.7 Device safety classification
1) Classified by operation mode: Continuous operating device
2) Type of protection against electric shock: Class I
3) Degree of protection against electric shock: B type
4) Applied part of the equipment: tip
5) Degree of protection against harmful ingress of water: Ordinary equipment (IPX0). Foot
pedal is anti-drip device (IPX1)
6) Degree of safety application in the presence of a flammable anesthetic mixture with air,
oxygen, or nitrous oxide:
Equipment cannot be used in the presence of a flammable anesthetic mixture with air,
oxygen, or nitrous oxide.
1.8 Main technical specification
Specification
Tip thread specifications for compatibility
Main Unit Size (mm)
Length*Wideth*Height
Main unit weight
Handpiece model
Control mode
Water supply mode
Power adapter input
Input power
Main unit fuse
Foot pedal shell protection Level
Tip output features
Water inlet pressure
Air inlet pressure
Water temperature
Software version
1.9 Operation environment
Environmental temperature: +5°C - +40°C ,
Atmospheric pressure: 70kPa - 106kPa,
4 |
Instruction Manual
_R0_XPOWER ablatore_bug_6lingue.indd 4 _R0_XPOWER ablatore_bug_6lingue.indd 4
Replacement instruction
Reusable and Durable;
Please change a new handpiece when the hand-
piece is blocked and cannot be dredged, or the
sealing performance is reduced, or the ventilation
pipe is seriously worn out
Reusable and Durable; Please change a newhand-
piece when the output power drops significantly or
does not work.
Reusable and Durable; Please replace the power
cord when it is cracked or non-conductive
Reusable and Durable; Please change a new pipe
when the water pipe is cracked and leaked.
Reusable and Durable. Please change a new one
as per Instruction Manual when its broken.
Reusable and Durable. Please change a new one
as per Instruction Manual when its broken.
Reusable and Durable. Please change a new one
as per Instruction Manual when its broken.
Reusable and Durable. Please change a new one
as per Instruction Manual when its broken.
Xpower
M3*0.5
320mm*330mm*120mm
4.0kg
S – PA - PAP
Touch control
Water tank
100VAC - 240VAC 50Hz/60Hz
200VA
T1.6AH 250V
IIPX1
30kHz±5kHz; Output
Tip output features main vibration offset of tip
1μm 90μm; Semi-offset force
0.1-5N; Output power of tip 3W-20W
0.1bar-5bar (0.01MPa-0.5MPa)
5.5bar-7.5bar (0.55MPa-0.75MPa)
≤ 45°C
1.0.0
Relative humidity: 30% - 75%,
Cooling water temperature: +5°C - +25°C
2 Installation
2.1 Main unit diagram
Ultrasonic handpiece Water tank
Main unit
Powder tank
Touch panel
Ultrasonic
handpiece
Air polishing
cable
handpiece
Air polishing
handpiece cable
Figure 1. Front view
2.2 Touch panel
2.3 Symbol Implication
Symbol Implication Symbol
Tip currently
in use
Endo mode
Data storage
function
Turn down water
volume/
power/
air pressure
Water volume
2.4 Schematic diagram of handpiece
LED lamp Handpiece
Cap Light pipe Index point
Figure 4. S Ultrasonic handpiece
Figure 5. PA Air polishing handpiece (supragingival)
Figure 6. PAP Air polishing handpiece (subgingival)
2.5 Schematic diagram of tip installation
Torque wrench Rotate
Tip
Handpiece
Figure 7.
Schematic diagram
of tip installation
Foot pedal socket
External air
supply
socket
Power
switch
Air filter
Power supply socket Power fuse slot
Figure 2 Back view
Figure 3
Touch panel diagram
Implication Symbol Implication
Scaling mode Periodontal
mode
Air polishing Cleaning mode
C
mode
Setting Water
heating switch
Turn up water
volume / Power
power / adjustment
air pressure
The connector of cable
Figure 8.
Schematic diagram
of external air supply installation
02/07/24 16:55 02/07/24 16:55