Tabla de contenido
Publicidad
GROUP
in which the fault is verified
- If the brake pedal is stiff, dismount and lubricate.
- If the brake lever has an excessive stroke, adjust by ac-
- After completing an overhaul, repair or adjustment to the
- To avoid stiffness and rusting to the controls of the flexible
Controls - Steering
column - Suspension
- If the steering column is stiff, or has excessive play, check
- If the front suspension is noisy, check according to the
22
INSTRUCTIONS VALID FOR All VEHICLES
Instructions relative to operations to be carried out
ting on the apposite screw at the cable extremity. For
obtaining a perfect braking action, the wheels should ro
tate freely when the respective brake lever and pedal
are in their resting position and the braking action should
start immediately said levers are operated.
If the brake cables are rusted, lubricate or substitute.
braking system, tests should be carried out under normal
road running conditions.
transmission, lubricate according to the table at page 9.
the upper ring nut to verify if it is correctly tightened or
not; see also indications at Sec. « Reassembling ».
If the steering column does not rotate regularly after ha
ving carried out the above mentioned adjustments, check
the roller bearing seatings and substitute if indented.
case in question ( substituting the damaged parts as ne
cessary)
---�-------------�-�-
--
------·-·
.. --· ---
NOTES
0
------
I,
i
I
Publicidad
Tabla de contenido
