Quick Preset Buttons; Menu; Lock; Lcd Menu Settings - Blackmagic Design Ultimatte 12 Manual De Operaciones

Ocultar thumbs Ver también para Ultimatte 12:

Idiomas disponibles

If your Ultimatte has a USB connector on the front panel, you can use this

port to connect the unit to your computer. This USB-C port is used for

updating and configuring the unit with Blackmagic Ultimatte Setup. On larger

Ultimatte models the USB-C port is on the rear panel.

Quick Preset Buttons

The three numbered buttons on the front panel are used to recall quick presets. If a quick

preset is available the corresponding button is illuminated green, when a quick preset is active

the button will be blue.

For more information, refer to the 'presets' section later in this manual.

Press and hold the 'lock' button for 1 second to lock the front panel. This disables the buttons,

preventing anyone from accidentally changing any settings. The button will illuminate red

when active.

Press and hold for 2 seconds to unlock the panel.

All the settings for your Ultimatte are located under the main 'setup' page. Simply scroll through

the setup menu to find the settings you need to change. These include network and matte

settings, checking the status of connected inputs, appearance settings and resetting the unit to

factory settings.

Press the 'menu' button on the front panel to open the menu settings.

LCD Menu Settings