Assigning Presets - Blackmagic Design Ultimatte 12 Manual De Operaciones

The preset window in Ultimatte Software Control
To save a preset:
1 Once you have a foreground source connected to your Ultimatte and have adjusted
your composite parameters, click on the file icon to open the presets window.
2 In the 'preset name' field, type in a name for your preset and click the 'save' button.
3 The saved preset will appear in the presets list.
To delete a preset:
1 Select the preset you want to delete from the list of saved presets.
2 Click on the 'delete' button and confirm your choice.
To load a preset:
1 Select the preset you want to load in the saved presets list.
2 Click the 'load' button. In the saved preset list, 'active file' will now appear next to the
loaded preset.
Renaming a preset:
1 Select the preset you want to rename from the saved presets list. The current preset
name will appear in the 'preset name' field.
2 In the 'preset name' field, type in a new name for the preset. Click the 'rename' button.

Assigning presets

You can assign up to five presets to 'quick preset' shortcuts. This lets you access presets
quickly using the 'quick preset' menu in Ultimatte Software Control or by using the numbered
buttons on units with built in LCDs. You can also recall presets using the 'quick load' buttons on
Smart Remote 4.
To assign a preset to a quick preset shortcut:
1 Select a preset from the preset list.
2 Use the 'assign to' menu to assign the preset to a quick preset shortcut.
Presets 62