Groups; Functions; Status Bar - Blackmagic Design Ultimatte 12 Manual De Operaciones

Configuration
Control Board Settings
Options
Monitor Cascade

Groups

This section of the interface contains the majority of the settings menus. For example, if you
wanted to adjust the foreground 'flare' controls:
1 Click on the 'foreground' main menu button to open the foreground settings.
2
Click on the 'Flare 1' button in the groups section to select the flare controls.
The flare controls will now be visible on each side of the panel and you can adjust them using
the control knobs.

Functions

The functions section provides specific settings that can be selected, enabled or disabled.
For example, the matte reset button is located in this section if you need to restore particular
settings to their default state.

Status Bar

You can see all the Ultimatte units being controlled by Ultimatte Software Control by glancing at
the status bar. Up to eight units can be controlled, and each unit icon will illuminate green when
identified on your network. When a unit is selected for control, the icon will illuminate blue.
Provides an overview of connected input sources and will tell you whether
they are locked or not.
Lets you customize the brightness of the Smart Remote 4's LEDs and set
the internal fan speed.
Turns the mouse pointer on or off if you have a mouse connected to Smart
Remote 4.
Enables the monitor cascade feature.
Ultimatte Software Control Layout 29