Rack Mounting; Teranex Mini Rack Shelf - Blackmagic Design Ultimatte 12 Manual De Operaciones

Rack Mounting

Teranex Mini Rack Shelf is a 1RU shelf that lets you install Blackmagic Ultimatte 12 HD Mini and
Ultimatte 12 HD models into a broadcast rack or road case.
Blackmagic Ultimatte 12 HD Mini and Ultimatte 12 HD are small, so you can install them next
to other Blackmagic Design equipment that share a similar form factor, such as Teranex Mini
converters, Blackmagic MultiView 4 and Blackmagic Web Presenter. For example, installing a
Blackmagic Ultimatte 12 HD Mini together with a HyperDeck Studio HD Mini means you can
record your program or monitor output. This modular design lets you build your own custom
video solutions that are portable and easy to use.
The Teranex Mini Rack Shelf Kit contains the following:
To mount Ultimatte 12 HD Mini and Ultimatte 12 HD models:
1 The first step to mount any product to the Teranex Mini rack shelf is to remove the
rubber feet from your device.
2 With both the rack and device upside down, line up the pre drilled holes on the rack
with the threaded mounting holes on the device. This will be via two central mounting
points on 1/3 width products or up to three mounting points on larger products such
as HyperDeck Studio HD Plus. The location of the mounting points will depend on
whether you are installing the unit on the left or right of the rack.
1 x Teranex Mini Rack Shelf
1 x 1/6 rack width blanking panel
Use the 1/6 blanking panel when mounting 1/2 rack
width products with a 1/3 width unit or blanking panel
2 x 1/3 rack width blanking panel
Use 1/3 width blanking panels when mounting single
products
Screws
8 x M3 5mm 2 x M3 10mm
Countersunk mounting Flat nylon screws for 1/6
screws blanking panels
Rack Mounting 82