Descargar Imprimir esta página

Matte Status - Blackmagic Design Ultimatte 12 Manual De Operaciones

Ocultar thumbs Ver también para Ultimatte 12:

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 411
IP Address, Subnet Mask and Gateway
Once Static IP is selected, you can enter your network details manually.
To change the IP address:
1
Use the settings dial to highlight 'IP address' and press the flashing 'set' button on
your Ultimatte's front panel.
2
Rotate the settings dial to adjust your IP address, pressing 'set' to confirm before
adjusting the next set of values.
3
Press 'set' to confirm the change and move to the next value.
When you have finished entering your IP address, you can repeat these steps to adjust the
Subnet Mask and Gateway. Once finished, press the flashing 'menu' button to exit and return
to the home screen.
DHCP
You can also enable DHCP instead of assigning an IP address manually.
DHCP is a service on network servers that finds your Ultimatte and assigns an IP address
automatically. DHCP makes it easy to connect equipment via Ethernet and make sure their
IP addresses do not conflict with each other.
To enable DHCP:
With 'protocol' selected press the flashing 'set' button to access the menu, scroll to 'DHCP'
and press 'set'.

Matte Status

You can use the matte status settings to change the background screen reference color
and perform an auto key of your composite.
Screen Reference Color
Use this option to select the color of your background. The default color is green.
Auto Key
Use the auto key function to perform a quick composite of your scene. Refer to the 'setting the
auto composite' section for more information.
LCD Menu Settings
21

Publicidad

loading