Abnormal Conditions; Specification - Logik L90BMS10E Manual De Instrucciones

Abnormal Conditions

GB
Status
The buttons do not
operate.
The breadmaker
makes noise during
use.
Some smokes comes
out of the steam vent
and there is a burning
smell.
The Display shows
.
The Display shows
.

Specification

Input Voltage
Power Consumption
28
Condition Cause
The mains plug is not connected
to the mains socket properly or is
disconnected from the mains socket.
The noise you may hear is the noise of
the motor during the kneading process.
Ingredients or baked product such
as bread crumbs have collected on
the Heating Element or inside of the
breadmaker.
The temperature sensor is inoperative.
The internal temperature is too high
230V ~50Hz
600W
Remedy
Connect the breadmaker to the mains
socket securely or connect to the mains
socket.
This is normal. It does not indicate any
malfunction.
Unplug the breadmaker and allow it to
cool before cleaning. Make sure to clean
the breadmaker after each use.
Have the breadmaker examined by
Qualified Technician.
Switch the breadmaker off, remove the
bread pan, leave the lid open and wait
until the breadmaker has cooled down.