Fuel Pressure Relieving; Fuel Line Replacement - Honda CRF450R Manual Del Propietario Y Guía De Competiciones

Fuel Pressure Relieving

1. Hang the fuel tank to the left side of the frame
(page 38).
2. Disconnect the fuel pump connector (1).
(1)
(1) fuel pump connector
3. Reposition the fuel tank and start the engine
and let it idle until the engine stalls.

Fuel Line Replacement

Disconnection
1. Relieve the fuel pressure (page 45).
2. Hang the fuel tank to the left side of the frame.
3. Remove the fuel quick connect fitting cover
(1) from the fuel pump (2).
4. Check the fuel quick connect fitting (3) for
dirt, and clean if necessary.
Injector side: Fuel Pump side:
(3)
(1) fuel quick connect fitting cover
(2) fuel pump
(3) fuel quick connect fitting
5. Remove the bolt (4), clamp and setting rubber
(5).
(5)
(4) bolt (5) clamp and setting rubber
6. Pull and release the joint rubber (6) of the
injector side from the retainer (7).
(1)
(7)
(6) joint rubber (injector side only)
(7) retainer
7. Place a shop towel (8) over the fuel quick
connect fitting.
Injector side:
(2)
(8) shop towel
(4)
Fuel System
(6)
Fuel Pump side:
(8)
(cont'd)
45
Servicing Your Honda