Riester RVS-100 Manual Del Usuario página 47

1.5 Equipment Symbols
Degree of protection against
IPX1
ingress of liquid
Pulse Oxygen Saturation
SpO
2
Non-Invasive Blood
NIBP
Pressure
Temperature
Temp
Symbol for the marking of
electrical and electronics
devices according to
Directive 2002/96/EC.
1.6 Packaging symbols
1.6 Packaging symbols
Symbol Symbol Note
Fragile. Handle with care.
This Side Up.
Keep dry.
Stacking layer limit, where 'n'
represents the maximum permissible
number of layers. (N = 6).
2. Safety
2. Safety
2.1 Safety Information
2.1 Safety Information
Warning:
Warning:

• Before putting the system into operation, verify that the
Before putting
•
RVS-100 and RVS-200 and accessories are in correct wor-
operation, verify that the RVS-100 and RVS-200
king order and operating condition.
and accessories are in correct working order and
• Do not use device if any electrical connections become da-
operating condition.
maged, bent, or misaligned.
Do not use device if any electrical connections
•
• To avoid explosion hazard, do not use the monitor in the
become damaged, bent, or misaligned.
presence of flammable anesthetics or other flammable
To avoid explosion hazard, do not use the monitor
•
substance in combination with air, oxygen-enriched envi-
in the presence of flammable anesthetics or other
ronments, or nitrous oxide.
flammable substance in combination with air,
• Do not open the monitor housings; electric shock hazard
oxygen-enriched environments, or nitrous oxide.
may exist. All servicing must be performed by personnel
Do not open the monitor housings; electric shock
•
authorized by the manufacturer only.
hazard may exist. All servicing must be performed
• When using the monitor with electrosurgical units (ESU),
by personnel authorized by the manufacturer only.
make sure the patient is safe. And the ESU must not
When using the monitor with electrosurgical units
•
contact with patient cable.
(ESU), make sure the patient is safe. And the ESU
• Do not come into contact with the patient during defibrilla-
must not contact with patient cable.
tion. Otherwise serious injury or death could result.
Do not come into contact with the patient during
•
• Do not rely exclusively on the audible alarm system for
defibrillation. Otherwise serious injury or death
patient monitoring. Adjustment of alarm volume to a low
could result.
level or off may result in a hazard to the patient. Remem-
Do not rely exclusively on the audible alarm system
•
ber that alarm settings should be customized according to
for patient monitoring. Adjustment of alarm volume
different patient situations and always keeping the patient
to a low level or off may result in a hazard to the
under close surveillance is the most reliable way for safe
patient. Remember that alarm settings should be
patient monitoring.
customized according to different patient situations
• The physiological data and alarm messages displayed on
and always keeping the patient under close
the monitor are for reference only and cannot be directly
surveillance is the most reliable way for safe
used for diagnostic interpretation.
patient monitoring.
• To avoid inadvertent disconnection, route all cables in a
The physiological data and alarm messages
•
way to prevent a stumbling hazard. Wrap and secure ex-
displayed on the monitor are for reference only and
cess cabling to avoid risk of entanglement or strangulation
cannot be directly
by patient or personnel.
interpretation.
• To avoid risk of electric shock, this equipment must only
To avoid inadvertent disconnection, route all
•
be connected to a grounded power supply.
cables in a way to prevent a stumbling hazard.
• No modification of this equipment is allowed. Do not mo-
Wrap and secure excess cabling to avoid risk of
dify this equipment without authorization of the manufac-
entanglement or strangulation by patient or
turer. If this equipment is modified, appropriate inspection
personnel.
and testing must be conducted to ensure continued safe
use of equipment.
• There will be significant risks of reciprocal interference
when the device is used in specific investigations or treat-
ments.
• The device's connector (including USB, network and so
on) can only be connected to the matched accessories and
network server. The misuse of them may cause damage
to the device.
• Operating high frequency electrosurgical equipment in the
vicinity of the monitor may produce interference and cause
incorrect measurements.
Caution:
• To ensure patient safety, use only parts and accessories
specified in this manual.
• At the end of its service life, the monitor, as well as its
accessories, must be disposed of in compliance with the
guidelines regulating the disposal of such products. If you
have any questions concerning disposal of the monitor,
please contact the manufacturer.
• Magnetic and electrical fields are capable of interfering
with the proper performance of the monitor. For this re-
•
•
•
•
•
•
•
the system into
•
Note:

•
•
•
•
2.2 General Safety
Warning: This monitor is neither

1．Safety precautions for installa
•
used for diagnostic
•
•
•
2
only be connected to a
No modification of thi
not modify this equipm
the manufacturer. If
appropriate inspectio
conducted to ensure
equipment.
There will be sign
interference when the
investigations or treatm
The device's connect
and so on) can only b
accessories and netw
them may cause dama
Operating high
equipment in the vi
produce interference
measurements.
Caution:
To ensure pa
•
and accessories speci
At the end of its servic
its accessories, must b
with the guidelines reg
products. If you have
disposal of the mo
manufacturer.
Magnetic and electr
interfering with the p
monitor. For this reaso
devices operated in
comply with the re
Mobile phone, X-ray eq
a possible source of in
higher levels of electro
Before connecting the
check that the voltage
power line are the sam
monitor's label or in th
Always install or carry
damage caused by dr
or other mechanical fo
Put the monitor in a lo
see the screen and ac
Keep this manual in th
that it can be obtained
The software was dev
IEC 62304. The possib
software errors is mini
This manual describes
Your monitor may not
a device that can be use
Connect the power co
socket. Only connect d
designated for use by
Avoid putting the moni
easily shakes or wobb
Enough space shall be
as to guarantee norma
Make sure the ambien
are stable and avoid th
47