VM Motori R753IE5 Manual Instrucciones Para El Uso página 111

ENGINE OIL FILTER CARTRIDGE REPLACEMENT
Follow the procedure below:
GB
IMPORTANT
Turn off the engine and remove the
ignition key. Wait at least 6 minutes
before disconnecting the negative
battery cable.
1 - Carry out the operation with the engine
cold.
2 - Prepare a container under the filter to
collect any leak.
3 - Unscrew the cartridge (A) with suitable
standard wrench and replace it. Clean the
surface of the support in contact with the
oil cartridge with a clean, lint-free cloth.
4 - Lubricate the seal of the new cartridge
(B) with engine oil before assembling it.
5 - Assemble the new oil cartridge and
manually tighten it until it locks.
English
5 - Assemble the new oil cartridge and
manually tighten it until it locks.
IMPORTANT
Check the engine oil filter cartridge
tightening using a torque wrench
calibrated at 12.7 Nm.
In case of need, contact a workshop
authorised by VM MOTORI
STELLANTIS EUROPE or the
manufacturer of the vehicle where the
6 - Turn the engine on and keep it running
at idle speed for approx. five minutes at
a temperature of 70°C - 80°C (158°F -
176°F).
A
48
R753IE5
B
42432107F