Descargar Imprimir esta página

VM Motori R753IE5 Manual Instrucciones Para El Uso página 78

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

The engine has been designed and
manufactured as an engine for the
generation of mechanical energy; any
other different or unintended use
relieves VM MOTORI STELLANTIS
EUROPE from any risks that may arise.
In any case, the use of the engine other
than that agreed at the time of purchase
relieves VM MOTORI STELLANTIS
EUROPE from any responsibility
for possible damage to engine and
property or injury to persons.
The engine has been manufactured in
compliance with the most recent safety
regulations, however it is good practice
to keep in mind that any moving part can
pose a danger.
Therefore, it is recommended never to
operate on any moving part. Make sure
that no one is near or in contact with
the engine before starting it.
- Do not touch the hot parts of the engine.
Avoid the effects of heat radiated by the
engine.
- Do not come into contact with or ingest
any substance, liquid or otherwise, used
for the engine operation and maintenance.
- The operator in charge of the engine
installation and maintenance must
wear clothing appropriate to the work
environment and the situation in which s/
he operates: in particular, the use of very
wide clothing, chains, bracelets, rings or
any other object that may be entangled
in moving parts must be avoided. Only
use clothing and/or protective equipment
provided for by the laws in force on safety
at work.
English
SAFETY INFORMATION
- The areas in which the operator is
working must always be kept clean and
free from any oily liquids, metal chips, etc.
- All maintenance operations should be
carried out by using suitable and efficient
equipment and tools.
- Before starting working, the operator
must be perfectly aware of the position
and operation of all controls and engine
characteristics; check all safety devices on
the engine on a daily basis.
- Operate in a well ventilated area: engine
exhaust gases are toxic. Do not operate
in areas with flammable materials or any
other part that may burn in contact with
the hot parts of the engine, such as the
exhaust gas system.
- Cut power supply off according to the
instructions given in this manual.
- Do not keep using the engine if
anomalies -signalled or not by warning
lamps - are detected, and in particular if
suspect vibrations occur.
15
R753IE5
GB
42432107F

Publicidad

loading