Publicidad
Idiomas disponibles
Idiomas disponibles
Name
Code
P09.02
P09.02.01
P09.02.02
P09.02.03
P09.02.04
P09.02.05
P09.02.06
P09.02.07
P09.03
P09.03.01
P09.03.02
P09.03.03
P09.03.04
P09.03.05
P09.03.06
P09.03.07
P09.03.08
P09.03.09
P09.03.10
P09.03.11
P09.03.12
P09.03.13
P09.03.14
P09.03.15
Acesso
P09.03.16
P09.03.17
P09.03.18
P09.03.19
P09.03.20
P09.03.21
P09.03.22
P09.03.23
P09.03.24
P09.03.25
P09.03.26
P09.03.27
P09.03.28
P09.03.29
P09.03.30
Press ENTER to access the sub-menus
Read-Only
Reading and editing with keyboard or ECO card
Table 8.6.3 - Menu Details
Text
Additional information
Administrator
Administrator user access
Administrator
Not applicable (Reserved)
Admin Password
Administrator user password (this is a 4-digit number)
Language
Setting the administrator user language
Time format
Setting the time format (12 or 24 hours)
Setting the date format (DD/MM/YYYY or MM/DD/YYYY or YYYY/MM/DD)
Date format
DD: Day with 2 digits (01 to 31)
MM: month with 2 digits (01 to 12) YYYY: year with 4 digits (e.g. 2015)
Pressure unit
Setting the pressure unit (BAR or PSI or kPA or MPA)
Temperature unit
Setting the temperature unit (ºC or ºF)
User 1
User 1 setup
Username 1
Username 1 with 8 alphanumeric digits
User 1 password
User 1 password (it's a 4-digit number)
Language
Setting user 1 language
Time format
Setting the time format (12 or 24 hours)
Setting the date format (DD/MM/YYYY or MM/DD/YYYY or YYYY/MM/DD)
Date format
DD: Day with 2 digits (01 to 31)
MM: month with 2 digits (01 to 12) YYYY: year with 4 digits (e.g. 2015)
Pressure unit
Setting the pressure unit (BAR or PSI or kPA or MPA)
Temperature unit
Setting the temperature unit (ºC or ºF)
P00 - Home
Blocked, not editable, read-only
P01 - Hour Meters
Blocked, not editable, read-only
P02 - Usage
Blocked, not editable, read-only
P03 - Error List
Blocked, not editable, read-only
P04 - Event List
Blocked, not editable, read-only
P05 - Service Provider
Blocked, not editable, read-only
P06 – Interface data
Blocked, not editable, read-only
P07 - Compressor data
Blocked, not editable, read-only
P08 - Message codes
Blocked, not editable, read-only
P09 – Access
Blocked, not editable, depends on access
Press Enter. Use the 'up' and 'down' arrows to set between 'not available', 'read-only' or 'edit access' (use the sub-menus
P10 - Settings EQUIP 1
on the right). Pressing 'Enter' again will store the values (returns to menu P09.03.18).
Press Enter. Use the 'up' and 'down' arrows to set between 'not available', 'read-only' or 'edit access' (use the sub-menus
P11 - Settings EQUIP 1
on the right). Pressing 'Enter' again will store the values (returns to menu P09.03.19).
Press Enter. Use the 'up' and 'down' arrows to set between 'not available', 'read-only' or 'edit access' (use the sub-menus
P12 - Settings EQUIP 1
on the right). Pressing 'Enter' again will store the values (returns to menu P09.03.19).
Press Enter. Use the 'up' and 'down' arrows to set between 'not available', 'read-only' or 'edit access' (use the sub-menus
P13 - Settings FLEX
on the right). Pressing 'Enter' again will store the values (returns to menu P09.03.21).
Press Enter. Use the 'up' and 'down' arrows to set between 'not available', 'read-only' or 'edit access' (use the sub-menus
P14 - Motor Protection
on the right). Pressing 'Enter' again will store the values (returns to menu P09.03.22).
Press Enter. Use the 'up' and 'down' arrows to set between 'not available', 'read-only' or 'edit access' (use the sub-menus
P15 - Impediments
on the right). Pressing 'Enter' again will store the values (returns to menu P09.03.23).
Press Enter. Use the 'up' and 'down' arrows to set between 'not available', 'read-only' or 'edit access' (use the sub-menus
P16 - Warning alarm
on the right). Pressing 'Enter' again will store the values (returns to menu P09.03.24).
Press Enter. Use the 'up' and 'down' arrows to set between 'not available', 'read-only' or 'edit access' (use the sub-menus
P17 – Stop alarm Im
on the right). Pressing 'Enter' again will store the values (returns to menu P09.03.25).
Press Enter. Use the 'up' and 'down' arrows to set between 'not available', 'read-only' or 'edit access' (use the sub-menus
P18 – SETUP I/O
on the right). Pressing 'Enter' again will store the values (returns to menu P09.03.26).
Press Enter. Use the 'up' and 'down' arrows to set between 'not available', 'read-only' or 'edit access' (use the sub-menus
P19 – Sensor SETUP
on the right). Pressing 'Enter' again will store the values (returns to menu P09.03.27).
Press Enter. Use the 'up' and 'down' arrows to set between 'not available', 'read-only' or 'edit access' (use the sub-menus
P20 – Diagnosis
on the right). Pressing 'Enter' again will store the values (returns to menu P09.03.28).
Press Enter. Use the 'up' and 'down' arrows to set between 'not available', 'read-only' or 'edit access' (use the sub-menus
P21 – Run schedule
on the right). Pressing 'Enter' again will store the values (returns to menu P09.03.29).
Press Enter. Use the 'up' and 'down' arrows to set between 'not available', 'read-only' or 'edit access' (use the sub-menus
P80 - GCI Main menu
on the right). Pressing 'Enter' again will store the values (returns to menu P09.03.30).
208
Publicidad
