Publicidad
Idiomas disponibles
Idiomas disponibles
The first symbol (on the left) defines the access level to each page:
User
Service
The second symbol (on the left) defines the menu:
User menu
Stops
Speed control
P01
+
09
T>
01
Pu
02
PL
03
do
UNLOAD PRESSURE
P01
+
In this example, a key symbol will be shown to indicate that all the menu items are locked and cannot be adjusted. The menus can also be
locked and available only for visualization when the compressor is operating; stop the compressor before trying any parameter adjustment.
1
P01
01.01
4
5
8
UNLOAD PRESSURE
When a menu item is selected, the value or menu option (5) will be selected. Each item is shown together with its unit (6), symbolical
identification (7) and description text (8). Press UP or DOWN to adjust the item configuration; press ENTER to set the new adjustment in
the permanent memory.
The menu settings can only be adjusted when the item is unlocked (4). Some items are only available for visualization, or cannot be adjusted
when the compressor is running; in this case, a "locked" symbol will be shown and the setting is blocked.
The menu settings can only be adjusted when the item is unlocked (4).
Some items are only available for visualization, or cannot be adjusted when the compressor is running; in this case, a "locked" symbol
will be shown end the setting is blocked.
To exit an adjustment at any moment, press ESC. The original value or option will be kept in the memory and the screen will return to the
list of items.
Press and hold RESET for some seconds at any time to immediately exit the menu mode and return to the operation screen (page 00).
Any value or option setting that was not confirmed and saved in the memory will be discarted and the previous settings will be kept.
- +
User parameters
Impediments
Calibration
Press UP or DOWN to select the desired menu and then press ENTER.
Each menu contains a certain number or items. The first item on the list will already be
selected. Press UP or DOWN to skip the items of the list; the list will scroll automatically.
0 °C
Note: When the first item is selected, the last item can be seen on top of the list; this
7.0 BAR
immediately indicates the number of items on the list.
6.5 BAR
5 SEC
To select a list item to adjust, press ENTER.
To go back to menu selection screen press ESC.
A menu might contain items that are only for visualization, the list of errors, for example.
Pu
3
2
7
6
Each menu item has a unique identification code regarding the menu(1); the
item number (2) and a sub-item number Each menu item has also a twodigit
identification (3), unique inside the menu.
The sub-items are only applicable in some cases: pressure scheduling, for
example. In most cases there can be only one adjustment associated to one
list item.
88
Alarms
Diagnostics
Scheduling
Publicidad
