Using Embedded Hdmi Audio Sources; Using A Third Party Audio Mixer Control Surface - Blackmagic Design ATEM Mini Manual De Instalación Y Funcionamiento

Ocultar thumbs Ver también para ATEM Mini:
Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 447

Using Embedded HDMI Audio Sources

Your ATEM Mini includes a built-in audio mixer that lets you use the embedded HDMI audio
from your cameras, media servers and other inputs without the need for an external
audio mixer.
Once you've connected your HDMI cameras to the switcher for vision mixing, there are no other
connections to make as the audio mixer uses the embedded audio in the video signal. This
saves space and makes setup very fast and low cost as you don't need separate audio
connections for every video source, and you don't need an external audio mixer unless you
prefer to use one.
The audio is mixed using the control buttons on your ATEM Mini, or via the Audio tab of ATEM
Software Control and output over USB webcam and HDMI outputs as embedded digital audio.

Using a Third Party Audio Mixer Control Surface

Using an Audio Mixer Control Surface
Connecting a hardware audio mixer control surface to your ATEM Mini provides you with the
ability to use both hands and adjust multiple audio levels at the same time.
An audio mixer control surface can be connected to your Mac or PC as a MIDI device using
Mackie Control commands to communicate with ATEM Mini.
Many third party MIDI control surfaces are compatible with your ATEM Mini but please check
with the manufacturer of your control surface if in doubt.
Using Audio
106

Publicidad

Tabla de contenido
loading

Tabla de contenido