Blackmagic Design ATEM Mini Manual De Instalación Y Funcionamiento página 23

Ocultar thumbs Ver también para ATEM Mini:
Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 447
NOTE
It's worth noting that simply selecting a specific style of transition in this palette
will only adjust the settings for these transitions, and you still need to select the style
of transition you want to perform in the transition control section on the software or
ATEM Mini's control panel. The software and ATEM Mini's control panel work together
and mirror all settings, so you can use any combination you like!
Downstream Key
ATEM Mini has a downstream keyer which can be configured from the
downstream key palette. The palette has drop down boxes for selecting the
fill and key signals to the keyer, plus sliders to set the pre multiplied key clip
and gain values, and mask settings.
Fade to Black
The fade to black palette is where you can set the fade to black transition
rate. An 'Audio Follow Video' checkbox is also provided as a shortcut for the
audio mixer's master fader AFV button. Selecting this feature lets you fade
your audio with your fade to black.
Media Player Tab
The 'media player' tab contains controls for your ATEM Mini's media player and connected
HyperDecks.
Media Player
Your ATEM Mini has a media player that plays back the stills that are stored in
the media pool memory built into the switcher. The drop down list is used to
select the still that will be played or made available on the media player input
to the switcher.
Hyperdecks
You can connect up to 4 Blackmagic HyperDeck Studio model disk recorders
and control them using ATEM Software Control's HyperDecks palette.
For more information refer to the 'HyperDeck Control' section of this manual.
Capture Tab
The capture tab supports the original ATEM production switchers that feature
USB output recording.
The capture tab lets you capture stills and set the timecode window.
Capture Still
If you need to capture a still image from your broadcast simply click on the 'capture still' button.
This acts like a still store which lets you add capture files to the media pool. You can then
immediately load a still into the media player and use it in your broadcast, or save the media
pool to your computer.
Using ATEM Software Control
23

Publicidad

Tabla de contenido
loading

Tabla de contenido