Getting Started; Plugging In Power - Blackmagic Design ATEM Mini Manual De Instalación Y Funcionamiento

Getting Started

At first glance ATEM Mini might seem intimidating with all the connectors and buttons, however
the unit is actually very easy to set up and use. Each feature serves a specific function and it
won't take long to get familiar with ATEM Mini and know exactly what each feature does.
This section of the manual will show you how to get started with your ATEM Mini, including how
to connect power, connect an HDMI video source, connect a microphone and plug into your
computer so you can start broadcasting online.
ATEM Mini's control panel lets you switch video sources, adjust audio
levels, perform transitions and apply graphics and effects

Plugging in Power

The first step to getting started is to plug in the mains power supply using the supplied power
adapter. Secure the connection to ATEM Mini by tightening the connector to the unit. This locks
the power cable to ATEM Mini preventing it from being accidentally removed.
1
Connect power to ATEM Mini's power
input using the supplied cable
2
Secure the connector to ATEM Mini by
tightening the connector screw
Getting Started 6