7
YouTube will now generate a stream name/
key that will direct Open Broadcaster to your
YouTube account.
Click the 'copy' button next to the stream key.
Copy the stream key that you will now paste into
Open Broadcaster.
9
To connect Open Broadcaster's broadcast link to
YouTube, click 'start streaming' in the bottom right
corner of the screen. This establishes the link to
YouTube from Open Broadcaster and from here
everything will now be set using YouTube Live.
11
With Open Broadcaster now communicating
with YouTube Live, you are ready to begin your
broadcast. Now it's time to perform your final
checks and make sure everything is good.
You are now broadcasting live on YouTube with Open Broadcaster. When your broadcast is
finished and you have pressed the fade to black button on ATEM Mini, you can end the stream
by clicking 'end stream'.
NOTE
Due to the nature of internet streaming there can often be a delay, so it's
important to watch the stream on YouTube and confirm your program has finished
before clicking 'end stream' to make sure you don't accidentally cut the end of your
broadcast short.
8
Return to Open Broadcaster and open the
preferences by clicking on 'OBS/preferences' in the
menu bar. Select 'stream'. Now paste in the stream
key you copied from YouTube and click 'OK'.
You will now see the video from your ATEM Mini in
the Open Broadcaster streaming preview window.
10
Go back to YouTube Live and you will see the
webcam program output from your ATEM Mini in
the background. Click 'done'.
12
If you are all set, you can now begin your broadcast
by clicking 'go live'.
Setting up Open Broadcaster
39