Labels Settings - Blackmagic Design ATEM Mini Manual De Instalación Y Funcionamiento

Audio Follow Video Behaviour
You can change the nature of the audio follow video feature for when switching sources.
For example, select 'hard cut audio when switching' to allow the the audio from an input to
switch immediately to another. If you want to the audio to smoothly transition over a brief period
of time, select 'add a transition to audio when switching'.
Split Audio
Split a mono input signal into two separate mono channels. This is helpful for mixing a mono
input into both channels on the stereo master output. You can also add a stereo simulation
effect using the advanced Fairlight controls on the audio page.
Click on the desired input checkbox to split the channels for that input.

Labels Settings

Label settings
The input labels settings let you customize the name of each input using a long and short name.
The short name will appear on the switcher input buttons on the software panel. If you are using
an additional ATEM broadcast panel, the long and short labels allow for the short label to fit into
the broadcast panel's smaller display. The short 4 character name is used to identify the video
input on the source names display. The longer input names support up to 20 characters and are
displayed in various dropdown source selection boxes on the software control panel.
To change an input name, click in the text field, enter the text and click 'save'. The input name
will be updated on the software control panel and external hardware panel if one is connected.
It's a very good idea to change both the short and long labels at the same time, so they match.
For example Camera 1 would be entered in as a long label, and CAM1 as the short label.
Changing Switcher Settings 50