Hyperdeck Control; Introducing Hyperdeck Control - Blackmagic Design ATEM Mini Manual De Instalación Y Funcionamiento

You have just recorded a macro using an ATEM 1 M/E Advanced Panel. The macro will appear
as a macro button named 'Macro 2' because it is located in macro slot 2. You can name your
macro and add notes by clicking on the 'edit macro' button in ATEM Software Control.
To run the macro, press the macro button to set your panel's source select row to macro mode.
The buttons will illuminate blue when in macro mode. Now press the macro 2 button. You can
easily see when a macro is running because the macro button will flash green and an orange
border appears around the LCD menu.
If your macro was successful, you should see your ATEM switcher mix from color bars to color 1
using a 2 second mix transition, pause for 2 seconds, then perform another 2 second mix
transition to black, all by pressing one button on your ATEM 1 M/E Advanced Panel. If you want
the macro to loop so it keeps running, press the 'loop' soft button to enable loop. Press again to
disable loop.
It's worth frequently testing your macros using different switcher settings to make sure the
macro performs all the specific functions you intended and doesn't miss any instructions or
produce something unexpected.
If you want to record over a previously recorded macro, or if you
made a mistake and want to start recording the macro again, press
the record button and confirm the overwrite when prompted

HyperDeck Control

Introducing HyperDeck Control

When ATEM Mini is connected to a network via Ethernet, you can also connect up to
4 Blackmagic HyperDeck Studio Mini disk recorders and control them using the HyperDecks
palette in ATEM Software Control. They can also be controlled from the system control buttons
on an external ATEM hardware panel. This is a very powerful feature! With four HyperDecks
connected to your switcher, it's like having a portable videotape department able to
record outputs from your switcher, play back graphics, or you can even set your switcher to roll
prerecorded segments at the press of a button!
Transport controls are located in the HyperDecks palette in ATEM Software Control, or in the
system control menu on an external ATEM hardware panel, which let you play back video, jog
and shuttle, skip clips, pause and more. You can also record video.
When you combine this feature with ATEM's powerful macros feature, it opens up a world of
creative possibilities that can really enhance your live production!
HyperDeck Control 83