Using The Audio Mixer - Blackmagic Design ATEM Mini Manual De Instalación Y Funcionamiento

Ocultar thumbs Ver también para ATEM Mini:
Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 447
To save the media pool:
1
Go to the menu bar at the top of your screen and click on 'file/save as'.
2
Choose the location you want to save to.
3
Click 'save'.
Now that your media pool is saved on your computer, you can access the captured stills and
use them in your graphics software.
Timecode
The timecode window provides a timecode counter that runs from the moment you power your
ATEM Mini. The counter can also be set manually.
To set the counter:
1
Click on the 'set timecode' edit box underneath the counter. An orange border will
appear when the box is enabled.
2
Type in a manual timecode.
3
Click the 'set' button.
The counter will now run timecode from your manually set values.

Using the Audio Mixer

The audio tab is used to mix audio sources connected to ATEM Mini via HDMI and mic audio.
Cameras and external mic audio sources are listed along the top of the audio mixer along with
the master audio output for the USB webcam program output to your computer.
The audio mixer displays tally lights for any audio sources that are currently on air or when AFV is
selected, as well as audio level, audio balance and buttons for selecting which audio should be used
Below each audio source is an audio level meter, a fader for setting the maximum audio level,
Using ATEM Software Control
24

Publicidad

Tabla de contenido
loading

Tabla de contenido