Procedure Of The Diagnosis In Functional Scheme; Diagnosis In The Working Surface; Diagnostics In "Function Block" Tab - Panasonic MINAS A6 Multi Serie Referencia Técnica

5.10 Diagnosis

5.10.1 Procedure of the diagnosis in Functional Scheme

The most important prerequisite for the diagnostics is the start of the program, for example "Start" button in
"Connection" toolbar is highlighted in grey.

5.10.1.1 Diagnosis in the working surface

The diagnostics in the workspace is only possible if the user has selected "Function Block" tab in the
diagnostics window. After selecting "Function Block" tab, the diagnosis starts automatically.
Procedure of the diagnosis in the working surface
When performing diagnostics in the work area, the current input and output states are displayed according to
their logical state "0" (red line) or "1" (yellow line). The logical state is specified in the workspace next to the
connection ID.
If "Function Block" tab is left in the diagnostics window and another diagnostic type is opened, i.e. a different
tab (e.g. "System Info"), the diagnostic information is removed from the work area.

5.10.1.2 Diagnostics in "Function Block" tab

It is possible to perform diagnostics for selected blocks.
Selecting the data to be displayed
In "Function Block" tab, it is possible to select function modules whose status is to be monitored. Function
blocks can be selected in the workspace. After selection, click on the button "Block diagnosis". After
clicking the button, the blocks are transferred to the monitoring list.
5-21