Johnson & Johnson ECHELON FLEX + Manual De Instrucciones página 9

Recommended separation distances between portable and mobile RF communications equipment
and the ECHELON FLEX 60 mm Powered Plus Articulating Endoscopic Linear Cutter
The ECHELON FLEX 60 mm Powered Plus Articulating Endoscopic Linear Cutter is intended for use in an electromagnetic environment
in which radiated RF disturbances are controlled. The customer or the user of the ECHELON FLEX 60 mm Powered Plus Articulating
Endoscopic Linear Cutter can help prevent electromagnetic interference by maintaining a minimum distance between portable and mobile
RF communications equipment (transmitters) and the ECHELON FLEX 60 mm Powered Plus Articulating Endoscopic Linear Cutter as
recommended below, according to the maximum output power of the communications equipment.
Separation distance according to frequency of transmitter
Rated maximum output power
of transmitter
W
150 kHz to 80 MHz
0.01
0.1
1 Not applicable
10
100
For transmitters rated at a maximum output power not listed above, the recommended separation distance d in meters (m) can be estimated
using the equation applicable to the frequency of the transmitter, where P is the maximum output power rating of the transmitter in watts (W)
according to the transmitter manufacturer.
NOTE 1 At 80 MHz and 800 MHz, the separation distance for the higher frequency range applies.
NOTE 2 These guidelines may not apply in all situations. Electromagnetic propagation is affected by absorption and reflection from
structures, objects and people.
Transport and Storage Conditions
Temperature: -22 ºC — 60 ºC
Relative Humidity: 10% — 80%
Pressure: 500 — 1060 hPa
Operating Environment Conditions
Temperature: 10 ºC — 40 ºC
Relative Humidity: 30% —75%
Pressure: 800 — 1060 hPa
How Supplied
The ECHELON families of endoscopic linear cutters are supplied sterile for single patient use. Discard after use.
m
80 MHz to 800 MHz 800 MHz to 2.5 GHz
0.12 0.23
0.38 0.73
1.2 2.3
3.8 7.3
12 23
9 10