Ambu aBox Duodeno Instrucciones De Uso página 12

It is recommended that the bottle of sterile water is placed in the designed bottle holder on
the left side of the aBox™ Duodeno. For detailed information regarding attaching the bottle
holder to the aBox™ Duodeno please refer to the section 4.1 below.
• Medical Grade monitor with resolution of at least 1920x1080 and a monitor size of at
least 27" with DVI or HD-SDI input(s). Recommended color space is sRGB.
• Image Capture Report and/or writing workstation.
• Vacuum source of at least -7 psi (-50 kPa) with suction system.
• Insufflation source approved for use in GI endoscopic procedures.
4.1. Attaching the Bottle Holder to the aBox™ Duodeno
The aBox™ Duodeno is shipped with one bottle holder that must be attached to the left side of
the device. Follow the illustrations below to properly attach the bottle holder.
Ambu® aBox™ Duodeno
5. Preparation and Inspection for Use
Numbers in gray circles below refer to illustrations on page 2. Inspect all ancillary equipment
to be used with this device as instructed in their respective Instructions for Use. Should any
irregularity be observed after inspection, follow the instructions as described in
section 12. Troubleshooting. If this device malfunctions, do not use it. Contact your Ambu sales
representative for further assistance.
• Inspect the content of the aBox™ Duodeno. Match all items in the package with the
components shown in the device description in section 2. 1
• If the device is damaged, a component is missing or you have any questions, do not use
the device, immediately contact Ambu.
• It is recommended that the aBox™ Duodeno is placed on level surfaces with the
capability of movement (i.e. mobile cart, medical equipment booms) such that the
system can be moved to the most advantageous position for any given patient and/or as
12
aBox Bottleholder - Assembly
Bottle Holder
5 x