Retigo 5T Manual De Instalación, Uso Y Mantenimiento página 78

ENGLISH
If a standard frosting cycle has been selected,
following screenshot will appear :
GB
If a SOFT frosting cycle has been selected,
following screenshot will appear :
To change the values within the single phases,
press in the area involved.
To save and store the set cycle press in
correspondence of the area
To start the cycle press in correspondence of the
area
Following screenshot will be displayed :
Pressing on the area
temperatures detected by the various probes, the
.
state of inputs / outputs and the alarms stored by
the system. To abort the current cycle press for at
least three seconds the area
20
.
Number of the current phase
Frosting symbol
Intensive cycle symbol
Temperature cycle symbol
the display show the
Time left
.