Retigo 5T Manual De Instalación, Uso Y Mantenimiento página 83

Custom Cycle
The function "custom" allows setting a cycle
composed of a maximum of 4 phases (3 for the
blast chilling and a conservation one) and can be
composed of temperature phases and/or timed
phases.
By selecting the custom cycle the system will
propose following screenshot :
It is possible to switch the phase from core probe
to timed and set the related set points.
To add a phase, press in correspondence of this
area .
The phase will be added and proposed during
editing.
To delete a phase press on the area
Once all desired phases are inserted and all
settings are done, press the below area on the right
.
Before running a cycle it is possible to change the
cell temperature
speed of the fans
conservation phase.
To confirm the new settings press the below area
on the right : following screenshot will be
displayed.
To change the values within the single phases,
press in the area involved.
To save and store the set cycle press in
correspondence of the area
To run the cycle press in correspondence of the
area
During a current cycle, following screenshot will be
displayed :
.
and the
Pressing on the area
temperatures detected by the various probes, the
during the
state of inputs / outputs and the alarms stored by
the system. To abort the current cycle press for at
least three seconds the area
25
ENGLISH
.
Number of the current phase
Blast chilling symbol
Temperature cycle symbol
Timed cycle symbol
the display show the
GB
.
Time Left
.