Retigo 5T Manual De Instalación, Uso Y Mantenimiento página 90

ENGLISH
GB
By pressing the area
possible to change the cell operating temperature.
By pressing the area
possible to set the duration of the leavening cycle.
By pressing the area
possible to change the fan speed.
Press in correspondence of the area
top to step to the fourth and last phase :
conservation.
By pressing the area
possible to change the cell operating temperature.
By pressing the area
possible to change the fan speed.
To run the cycle press in correspondence of the
area
During a current cycle, following screenshot will be
displayed :
it is
it is
it is
at the right
Pressing on the area
temperatures detected by the various probes, the
state of inputs / outputs and the alarms stored by
the system. To abort the current cycle press for at
least three seconds the area
it is
32
.
Number of the current phase
Time from cycle begin
Single phase time
the display show the
it is
.