Alpinestars TECH-AIR OFF-ROAD Manual Del Usuario página 21

2) After the LED Check phase, the System will automatically activate and the Status LED
(4c) will turn SOLID BLUE (Figure 10). In this condition, the User can also check the selected
Riding Mode (checking the Riding Mode LED [4d]) and the System battery level (using the
Battery LED [4e]) (see Figure 6 above).
WARNING! If the Status LED (4c) turns SOLID RED and the System performs a
long vibration (~ 3 seconds), a fault is present (Figure 11), and the
System is NOT working and NOT ready to protect the User (see
Section 19 "Troubleshooting" for more information);
Figure 11: System NOT WORKING: the Status LED (4c) turns SOLID RED
22 EN
Figure 10: System active and correctly working;
and the System performs a long vibration (~ 3 seconds);
SYSTEM ACTIVE
SYSTEM FAULT
PRESENT