WARNING!
ALWAYS switch the System off by unzipping (opening) the Activation
Zip (1) or pressing the System Button (4a) for 5 seconds when you
are not riding a motorcycle, even if you continue to wear the System.
Although the System has been evaluated for a number of non-riding
activities, keeping the System switched on and/or active increases
the possibility of unwanted deployment and drains the battery. So as
a rule, when not riding, always open the Activation Zip (1).
WARNING!
When being stored, transported, or shipped, the User MUST follow
the instructions reported in Section 16 "Cleaning, Storage and
Transportation."
IMPORTANT!
Even if the System is switched on, the System will automatically switch off
if the System detects a position incompatible with the normal usage of the
System or no movements for more than 10 minutes. Only when STREET
Mode is selected, the System will automatically switch off immediately
after you have just put the System on, after a shorter waiting period of
approximately 30 seconds.
When either of the above situations occur, open (unzip) and close the
Activation Zip (1) to restart the System and perform a new System Check.
7. Battery Charging
The Tech-Air
Off-Road System is supplied with a Type C Charging Cable (12). To charge the
®
System, the User must connect the supplied standard Type C USB Charging Cable (12) to
the Type C USB Recharge Port (4b) present on the LED Display (4). Once on charge, the LED
Display (4) will show different blinking colours in the Battery LED (4e) (Figure 15), according
to the description provided in "LED Indications Summary" (see Section 8). Fully charge the
System before its first use.
IMPORTANT!
While charging, always be sure that the USB Charger is connected to a power
source sufficiently close to the Tech-Air
the power source is always easily accessible.
26 EN
Off-Road System, and be sure that
®