Alpinestars TECH-AIR OFF-ROAD Manual Del Usuario página 71

• Prior to each use, the System should be inspected for any signs of wear or damage.
Additionally, when turned on, the LED Display (4) must be checked. In the event of a System
fault (denoted by the Status LED (4c) showing a red LED or the absence of any indicators),
Users should stop using the System immediately and refer to the user manual.
• Prior to each use, the Activation zip (1) has to be properly closed when worn and the Status
LED light (4c) has to be blue. Before each ride always be sure to check that the electronic
case (16) is tightly closed.
• Whenever the LED Display (4) gives a low battery indication, the System MUST be
recharged as soon as possible.
• The System must never be machine washed, submerged in water, tumble dried or ironed,
except for the sole washable components as described in Section 16.
• After a deployment, the System must be returned to either an Alpinestars' Tech-Air
which can arrange for the System to be recharged or directly to an Alpinestars' Tech-Air
Service Center.
• Even if the System has not been used, or the Airbag has never fired, it is important that
the System be serviced at least once every two years or 500 hours of functioning. This can
be arranged through an Alpinestars' Tech-Air
Service Center.
72 EN
Dealer or directly by an Alpinestars' Tech-Air
®
Dealer
®
®
®