Alpinestars TECH-AIR OFF-ROAD Manual Del Usuario página 58

Description of Full Back Protected Area:
NOTE: All dimensions refer to the waist to shoulder lenght (100%) of the
biggest user
Sizing & fitting info regards the inflatable protector integrated onto the System
The base layer size is directly linked to the 'Waist to Shoulder length,' as this gives the best
representation of back length. Waist-to-shoulder length is the length measured on the
back from the waistline to the junction of the shoulder to the neck at the highest point.
Table 5 below lists the sizes of the System, the waist-to-shoulder length, and a suggested
person height to assist with the selection. For the waist to shoulder length of the bigger
user, refer to the upper value in the third column of Table 5 for each size.
Dimensions
59 EN