Joimax Shrill Deflector Shaft 2 Manual De Uso página 14

After inserting the Deflector Shaft with Blade into the working channel of the
endoscope, the Deflector Blade can be used for removal of hard tissue or bone
material under endoscopic view in straight position (0°) as well as in the bent
position (12°, 24°, 36°) as described in figure 8–8.3 below. See also separate
document "Instructions for Use of Shrill
8 + 8.1 + 8.2 + 8.3 For bending the tip of the Deflector Shaft in three steps into
12°, 24° and 36° position, use the deflection adjusting lever (watch reference mark).
8
8.2
For application, see also the „Instructions for use of the
Shrill System".
®
When application is finished, make sure that the tip of the Deflector Shaft is
brought back into straight position (0°) using the deflection adjusting lever
(watch reference mark, see figure 9). Then remove the Deflector Shaft with Bla-
de from the endoscope's working channel (see figure 9.1).
9 + 9.1 Before removing the Deflector Shaft with Blade, bring the deflection
adjusting lever in straight position (0°). Then remove the Deflector Shaft with
Blade from the working channel of the endoscope.
Reference mark
9
14
0°
24°
Shaver Blades" respectively.
®
8.1
8.3
9.1
12°
36°
0°