Joimax Shrill Deflector Shaft 2 Manual De Uso página 15

10
Do not remove the Deflector Shaft from the endoscope's
working channel in the bent position. Always bring the
tip into straight position (0°) see figure 10)).
9. DISASSEMBLY INSTRUCTIONS
After removal of the Deflector Shaft with Blade from working channel of the en-
doscope, disconnect the Deflector Shaft with Blade from the Shaver Handpiece
(see figure 11). The disassembly of the Deflector Blade from the Deflector Shaft
is described in the figure 12 and 12.1.
11
and pulling the Deflector Blade at its distal end out of the Deflector Shaft. Dis-
card the Deflector Blade (Y single use only) and prepare the Deflector Shaft for
processing (see chapter 10).
12
Make sure that the Deflector Blade is removed from the Deflector
Shaft after usage. Dispose the Shaver Blade as described in the
separate document "Instructions for Use of Shrill
The processing of the reusable Deflector Shaft is described within the following
chapters.
10 Symbol on Deflector Shaft (high-
lighted with an arrow) means: Do not
remove the Deflector Shaft from the
endoscope's working channel in ben-
ded condition.
11 Disconnect the Deflector Shaft with
Blade from the Shaver Handpiece.
12 + 12.1 Remove the Deflector Blade
from the Deflector Shaft by pressing
the Abrasor/Resector Locking Button
12.1
Shaver Blades".
®
15