(4) Lubricating place of the top feed roller drive connecting section and the main shaft section
1
2
(5) Grease applying place
2
A
1
1
1
1
B
Opening/closing the
roller cover
1
− 11 −
Apply one or two drops of oil once a week to fi ve points 1
of the upper feed roller drive connecting section and the
main shaft section once every week.
When applying oil to the top feed roller drive connecting
section, perform oiling by opening and closing roller cover
2 .
In addition, when oil adheres to oil receiving sections B of
roller cover 2 , wipe it out.
Perform oiling to the main shaft section by removing the
rubber plug of the belt cover when using MT03.
Remove the thumbscrew when opening and closing the
roller cover.
Apply grease supplied with the machine as the accessories
every three months, as a standard, to the respective slide
sections of presser spring 1 and presser lifting bracket 2 .
Remove the roller cover and apply grease
(Part No.: 40013640) supplied with the unit
to joining part A of main shaft and hook
driving shaft.