Siemens SINAMICS S120 Manual De Listas página 2241

Signal targets for CU_STW1
Signal Meaning
CU_STW1.0 Central measuring probe, synchronizing signal source
CU_STW1.1 RTC real time synchronization PING
CU_STW1.2 ESR-Trigger
CU_STW1.3 Reserved
CU_STW1.4 Reserved
CU_STW1.5 Reserved
CU_STW1.6 Reserved
CU_STW1.7 1. Acknowledge faults
CU_STW1.8 Reserved
CU_STW1.9 Reserved
CU_STW1.10 Acknowledgment automatically suppressed
CU_STW1.11 Reserved
CU_STW1.12 Master sign-of-life bit 0
CU_STW1.13 Master sign-of-life bit 1
CU_STW1.14 Master sign-of-life bit 2
CU_STW1.15 Master sign-of-life bit 3
<1> Used in telegrams 390 to 394.
<2> Only available when the function module "Extended setpoint channel" is active (r0108.9 = 1).
1 2
DO: CU_G, CU_S
PROFIdrive - CU_STW1 control word 1, Control Unit interconnection
<2>
3 4
Interconnection [Function diagram] [Function diagram]
parameters internal control word signal target
p0681[0] = r2090.0 -
p3104 = r2090.1 -
p0890.0 = r2090.2 -
- -
- -
- -
- -
p2103[0] = r2090.7 -
- -
- -
p3116 = r2090.10 -
- -
p2045 = r2050[0] -
5 6
fp_2495_54_eng.vsd
27.06.13 V05.02.03
PROFIdrive sampling time
<1>
Inverted
- -
- -
- -
- -
- -
- -
- -
- -
- -
- -
- -
- -
- -
7 8
Function diagram
- 2495 -
S120/S150/G130/G150